Our XC65D Digital Laser Scanner has my engineering department in awe at the speed and accuracy in which I can scan a part. We were running an XC50LS and the difference is night and day compared to the XC65D. This was one investment that will have no problem paying for itself.
We had a rough start with scanning. From software to equipment, Nikon Metrology worked with us the entire time. The Nikon Metrology team really pulled together to figure out our situation and get us up and running.
When I have to call Nikon Metrology I am always greeted with a hello. Even if I don’t know who I need to talk with, someone from the Nikon Metrology team always does. And when we have an issue with an invoice, the Nikon Metrology team works with me to get the problem resolved.
I can say that the Nikon Metrology team goes above and beyond. I am grateful to have the Nikon Metrology team on our side.
Thank you Nikon,
~Michael B.
CMM Technician – Kautex Textron
________________________________________________________________________________________
Just a quick note to let you know how great it is to have Rob here working on our equipment. Many of your guys provide good service, but Rob has gone above and beyond all week communicating with me and the guys regarding what he is doing, the status, what he is finding, giving feedback, giving recommendations, etc. Tim and Jerry have been in the room since you installed the equipment 10 years ago, but Rob has still been sharing observations and information that will help all of us. We appreciate this because it helps us understand the equipment better when we call for advice or support. I’d consider Rob “the best of the best” for service.
~Todd
________________________________________________________________________________________
We don’t often take the time to express our gratitude for a vendor’s support, so I wanted to let you know that we sincerely appreciate Nikon’s continued support of our VMR 3020 system programming. Michael Kireyev’s visit this morning proved very helpful to us for understanding how to use the power of the system to resolve some critical part measurement issues.
Michael’s quick analysis of the task at hand and willingness to teach has made him a great resource for us. His quick response to our questions and his determination to fit us in to his busy schedule has given us timely resolution to issues we have encountered in our programming efforts. Michael’s help continues to allow us to get the most out of the system and it is very much appreciated.
~Jim G. – Point Medical Corporation
_______________________________________________________________________________
Vicount would like to say thanks to the Team at Nikon (Metris) for the continuous help and support for our LC50 Scanner that we purchased 6 years ago.
Alex Lucas and the crew have gone beyond their means to help launch a successful scanning system on our Brown & Sharpe Global CMM.
The LC50 Scanner has enabled Vicount to shorten our turnaround time for jobs, while collecting massive amounts of data to either analyze or reverse engineer the parts.
We are able to reverse engineer details or parts for customers with a turnaround time of 3 days, compared to 7 days previously.
It has been a pleasure working with Nikon (Metris) for the last 6 years.
~Kevin S. - Vicount Industries
Quality supervisor
_______________________________________________________________________________
I just wanted to take a moment to credit one of your employees with what I consider to be service above and beyond the call of duty. Adam is your Field Service Engineer who normally comes to our facility to perform calibrations and service on our CMM. In the short time I have known him, he has proven himself to be a caring and capable technician who is always willing to help.
This past Saturday, our line was asked to come in to work to help with a production issue. I encountered significant trouble with our CMM software and couldn’t run the machine, and as a result I was stopping the line. After exhausting all other possibilities, I reluctantly decided to text Adam. He called me immediately and talked me through finding and fixing the problem. I am guessing he had better things to do on his day off than deal with me, but he did it anyway. It’s people like Adam who make the difference, and you can be proud to have him on your team.
~Michael L. - Evo Frame Machining
_______________________________________________________________________________
Thanks for the help! Nikon Metrology support has always gone above and beyond to resolve any problem I have encountered.
~Jim C. – Atlas Copco Secoroc LLC
_______________________________________________________________________________
I wanted to take a minute to say that Randy was great. He knew almost immediately what the issue was with our Integra. He not only got it back to where it needed to be, but took the additional steps to make sure that the rest of the machine was right. Checking the air flow for the air bearings, he found that the X Axis drive alignment also need tweaking. Again, thank your team for me. Your support is greatly appreciated.
~ Don W. – Exactech
____________________________________________________________________________________
This is to convey appreciation for the assistance we received from one of your employees, Nate. Due to a computer issue here, we had to email in for some technical support, and it was our good fortune that we got Nathan on the other side of the line. His professionalism and knowledge of the software that we were using was instrumental in getting our CMM back up in running in no time. With so many companies out there wanting people to use their software, your customer service makes you stand out from other vendors and will definitely be considered before any other software systems are purchased by us. “Special thanks to Nate.”
~ Satisfied Customer
